MOORE POWERELECTRICAL

Electrician Chemung, NY

Electrician in Chemung, NY: a local electrician for the Town of Chemung

Need a local electrician in Chemung, New York? Call (815) 456-4349. Moore Power Electrical is a referral service that connects homeowners in the Town of Chemung, including Beantown, Owens Mills and the hamlet of Chemung, with independent local electricians.

  • Locally
    licensed pros
  • Permits pulled
    when required
  • Chemung
    and nearby
  • Written estimate
    before work

Chemung. Wired right.

ZIP 14825Chemung County, New York
Local licensingNew York has no statewide electrician license. Rules are set locally.
Town permitsThe Town Code Enforcement Officer approves all building permits in Chemung.
NYSEG regionNYSEG's Elmira division serves much of Chemung County.
Chemung RiverThe river's record crest at Chemung was 31.62 feet in June 1972.

Local homes.
Local rules.
Licensed hands.

Who we are

A phone referral service for the Town of Chemung

Moore Power Electrical is a referral service. We do not do electrical work and we hold no electrical license. We are not linked to any Chemung County business with a similar name.

You call and describe the job. We pass it to an independent electrician who works in the Chemung and Elmira area. That electrician quotes the job, does the work and answers for it.

This page covers the Town of Chemung in the southeast corner of Chemung County, on the Pennsylvania line. It does not cover Queensbury or other New York towns.

  • One callTell us the job, your road and your hamlet.
  • Independent electricianA local electrician quotes and does the work.
  • Written priceYou get the price first. The referral is free.

Electrician near you

Finding a local electrician near Chemung

The Town of Chemung is rural, with about 2,368 residents at the 2020 census. Electricians who work here usually come from the Elmira and Waverly area, so one call to us saves you calling around.

Call (815) 456-4349 any time. For urgent problems, we connect you with an electrician who takes urgent jobs near Chemung when one is available.

Call 911 first for smoke, sparks or fire. Call your utility for a downed line or a road-wide outage.

Common calls from Chemung homes

  • A breaker that trips or will not reset
  • Outlets or lights that stop working
  • Generator hookups for winter outages
  • Power to a barn, garage or workshop
  • Checks after river or basement flooding
  • Pool pump and pool equipment wiring

Electrical services in Chemung

Electrical services we connect in Chemung

Not sure which one you need? Call and describe what is happening. We will match you with a licensed electrician who does that work.

Permits

Building permits through the Town of Chemung code office

The Town of Chemung Code Enforcement Officer receives and approves all building permits in the Town. Permit forms and requirements are on the Forms tab of the Town website.

Town code enforcement

Town of Chemung, 48 Rotary Road Extension, Chemung, NY 14825.

Phone (607) 529-3532, extension 3.

Ask the office which permits your electrical job needs before work starts.

Electrical inspection

Many New York towns accept electrical inspections from approved third-party inspection agencies.

Ask the Town code office which inspection it accepts for your job.

  • Additions, garages, pools and solar arrays usually involve both a building permit and electrical work.
  • The electrician can book the electrical inspection. Keep the certificate with your house papers.
  • Live in Elmira or another town? Your permit office is different. Check with that town or city.

Licensing

Electrician licensing in Chemung is local

New York State does not issue an electrician license. Each city, town or village decides whether to license electricians, and many rural towns do not.

Ask the Town of Chemung code office whether a local license applies to your job. Then ask the electrician for that license, if one applies, and for proof of insurance.

The Town borders Bradford County, Pennsylvania. An electrician from across the line still follows New York code and the Town's permit rules on a Chemung job.

  1. 1. Ask the TownCheck whether a local license is required.
  2. 2. Ask for papersGet the license (if required) and an insurance certificate.
  3. 3. Confirm the permitMake sure the permit is filed before work begins.

Power supply

NYSEG, outages and generators in Chemung

NYSEG's Elmira division serves portions of Chemung, Schuyler and Steuben counties. Your bill shows which utility serves your home in the Town of Chemung.

The utility owns the lines, transformer and meter. The panel and wiring inside your home are yours, and they are the electrician's job.

Summer storms and winter ice bring down lines on rural roads. A generator keeps a well pump, a furnace and a freezer running, but it must connect the safe way.

Generator basics

  • Use a transfer switch or an approved interlock, installed by an electrician.
  • Never plug a generator into a wall outlet. It can send power back onto the lines.
  • Run portable generators outdoors, away from windows and doors.
  • Label the circuits you need first, such as the well pump and the furnace.

River flooding

Chemung River flooding and your wiring

The Chemung River runs through the south part of the Town. The National Weather Service gauge at Chemung has a flood stage of 16 feet.

The record crest at that gauge was 31.62 feet on June 23, 1972. Other top crests were 24.1 feet on September 27, 1975 and 23.97 feet on May 28, 1946.

Panels, outlets and equipment that sat in water need an electrician's check before power goes back on. Floodwater leaves silt and corrosion inside breakers and boxes.

After water gets in

  • Keep the main breaker off until an electrician checks it.
  • Do not stand in water to reach the panel.
  • Have flooded outlets, breakers and furnace wiring replaced, not dried and reused.
  • Ask the Town code office whether repairs need a permit.

Solar

Solar panels in Chemung: the electrical side

People in Chemung search for solar panels. A solar array is part roof or ground work and part electrical work, and the electrical part decides whether it passes inspection.

The electrician checks whether the panel has room for the solar breaker, wires the inverter and disconnects, and connects the system to the utility meter under the utility's rules.

Start with the Town code office for the building permit. Then confirm the electrical inspection and the utility's interconnection steps before the array goes up.

  • Panel roomOlder or full panels may need work before solar connects.
  • Town permitThe code office approves building permits in the Town.
  • Utility approvalThe utility approves the connection to its grid.

Cost factors

What affects the cost of electrical work in Chemung

The electrician you are connected with sets the price and gives it to you in writing. We do not set prices.

These factors change the price of most jobs in the Town:

  • TravelRural roads and distance from Elmira or Waverly add drive time.
  • House ageOld wiring and small panels add work once walls open.
  • Permit and inspectionTown permit and inspection steps add time.
  • UrgencyStorm and after-hours calls usually cost more than booked visits.

From call to final inspection

How a typical Chemung job works

  1. You call

    Tell us what is happening, your ZIP and how urgent it is. Have a photo of the panel label ready if you can.

  2. We connect you

    We match you with an independent, licensed electrician who handles that kind of work near you.

  3. Estimate and permit

    The electrician confirms the scope in writing and pulls a permit when the job needs one.

  4. Work and inspection

    The work is done, the local inspector signs off when required, and the utility reconnects service if it was disconnected.

Areas we serve near Chemung

Your neighborhood, your local electrician

We connect homes and businesses in Chemung and nearby New York communities.

ZIP codes we serve

  • 14825

Before you call: your ZIP, a photo of the panel label, and when the problem started.

Call (815) 456-4349

Questions we hear

Electrician Chemung FAQs

Talk to a licensed electrician

Describe the problem and your ZIP. We will connect you with a local pro in Chemung.

Call (815) 456-4349
How do I find a local electrician in Chemung, NY?

Call (815) 456-4349 and describe the job. We connect you with an independent electrician who works in the Chemung and Elmira area.

Does this page cover Queensbury or other New York towns?

No. This page covers the Town of Chemung in Chemung County, ZIP 14825, including Beantown, Owens Mills and the hamlet of Chemung.

Who issues building permits in the Town of Chemung?

The Town Code Enforcement Officer receives and approves all building permits. Call (607) 529-3532, extension 3.

Does New York require an electrician license?

Not at the state level. Licensing is local. Ask the Town of Chemung whether a license applies to your job.

Who supplies electricity in Chemung?

NYSEG's Elmira division serves much of Chemung County. Check your bill to confirm the utility for your address.

What should I do if floodwater reached my panel?

Keep the main breaker off and call an electrician. Breakers, outlets and wiring that sat in floodwater need inspection and usually replacement.

Is Moore Power Electrical an electrical contractor?

No. We are a referral service. The independent electrician does the work, sets the price and handles the permit.

Page updated 2026-10-25.

Call (815) 456-4349